Vx 354 Programming Software

Vertex VX-351 or VX-354 Cloning Requires a CT-27A Radio-to-Radio Cable Adding a new Vertex Standard or radios to your existing fleet is a simple process with the built-in cloning feature. All you need is a Vertex cloning cable to transfer the programming information.

(4) Vertex VX-354-AG7B-5 UHF Radios - All new cases, (3)Hand Mics and pgm cable See more like this Vertex Standard VX-231 VX-351 VX-354 OEM Replacement Channel Selector Brand New.

In next page click regular or free download and wait certain amount of time (usually around 30 seconds) until download button will appead. Automation studio 5.0 download free. If file is multipart don't forget to check all parts before downloading!

A VX-351 will not clone to a VX-354 and all models must be identical using the same VHF or UHF band. VX-350 Series Cloning is a 6 Step Procedure • Turn both radios OFF • Connect the CT-27 cloning cable between the MIC/SP jacks of the two radios. • Press and hold the “Side 1” key and the “PTT” key while turning the radio ON.

The LED will remain off and if a VX-354, it will display “ CLONE”. • Repeat step 3 on the other radio. • To switch the radio to receive data, press the “Side 1” key. Then the LED indicator will glow “ Green“.

• To switch the radio to transmit data, press the “PTT” key. Then the LED indicator will glow “ Red“. When the data transfer is successful, the VX-354 display will return to “CLONE” or if a VX-351, the TX/BUSY indicator will turn off. You are now ready for the next radio or turn both radios off and disconnect the CT-27 cable. You can then power on the radios and begin normal operation.